SPONSORED LINKS

98 Buick Riviera

Tiny
VICTOR JUAREZ
  • MEMBER
  • 1998 BUICK RIVIERA
  • 6 CYL
  • 2WD
  • AUTOMATIC
  • 115,342 MILES
My buick riviera wont start. It has no spark ive changed the ignition moduel and the crank shaft sensor. Checked the fuses and iam at a stop need some help thanks.
Saturday, March 26th, 2011 AT 8:33 PM

8 Replies

Tiny
JACOBANDNICKOLAS
  • MECHANIC
  • 108,170 POSTS
Are you getting power to the coil? Have you checked all main fuses under the hood?
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Sunday, March 27th, 2011 AT 3:08 AM
Tiny
VICTOR JUAREZ
  • MEMBER
  • 5 POSTS
Ive only checked all the fuses under the back set and on the side of the dash board was checking the spark and it looks to have a very low spark berly visible
Was this
answer
helpful?
Yes
No
Sunday, March 27th, 2011 AT 3:36 AM
Tiny
JACOBANDNICKOLAS
  • MECHANIC
  • 108,170 POSTS
Check the coil to see if it is the problem. It sounds bad.
Was this
answer
helpful?
Yes
No
Sunday, March 27th, 2011 AT 3:40 AM
Tiny
VICTOR JUAREZ
  • MEMBER
  • 5 POSTS
My brother has a car that has the same coil setup and I used his coils and moduel in mine erlyier his car works and still nothing and I just went outside and checked the fuses under the hood and they all good
Was this
answer
helpful?
Yes
No
Sunday, March 27th, 2011 AT 3:49 AM
Tiny
JACOBANDNICKOLAS
  • MECHANIC
  • 108,170 POSTS
If your parts work on his car and everything is good, then you need to check wiring to the PCM as well as the PCM itself. Make sure nothing is corroded, check continunity in the wiring to the coil to make sure there is no internal wiring damage. Check the plug to the PCM for corrosion, pins pushed in.
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Sunday, March 27th, 2011 AT 4:03 AM
Tiny
VICTOR JUAREZ
  • MEMBER
  • 5 POSTS
Some pepole been telling me that my timming chain me be off but no back fires or nothing sounds normal when it turns over. What about the camshaft sensor? And what excactly is the pcm?
Was this
answer
helpful?
Yes
No
Sunday, March 27th, 2011 AT 4:08 AM
Tiny
JACOBANDNICKOLAS
  • MECHANIC
  • 108,170 POSTS
The PCM is the power control module. It runs just about everything. As far as the timing, you would still have good spark just at the wrong time.
Was this
answer
helpful?
Yes
No
Sunday, March 27th, 2011 AT 10:58 PM
Tiny
VICTOR JUAREZ
  • MEMBER
  • 5 POSTS
Still wont work.
Was this
answer
helpful?
Yes
No
Sunday, April 3rd, 2011 AT 5:16 PM

Please login or register to post a reply.

Related Crankshaft Sensor Replace/Remove Content

Crankshaft Sensor Symptoms
GUIDE
Crankshaft Sensor Symptoms
Most modern car engines use a crankshaft sensor to monitor the engines crankshaft rotation. This sensor sends feedback information to the cars computer which then adjusts...
VIEW MORE

Sponsored links