1997 Saturn SC1 Wiring pinout diagrams

SATURNV8

MEMBER
1997 SATURN SC1

In have taken a Saturn And built my own chassis installed a LS1, tremec6speed, and ford 9". I was removing extra wiring from the original wiring harness and unfortunately I cut out some wires that go from the instrument panel fuse block to a 24 pin plug from the 24 pin plug which connects to all the wiring that goes to the interior and the rear of the car. HELP Please 813-601-6815 Bob

Images (Click to make bigger)

6 Replies

MHPAUTOS

MECHANIC
31,938 POSTS

You can get a tool to remove the pins from the cannon plug, using new pins replace damage section of wiring and always solder and seal all joints, you should not have a problem here.

Was this

answer

helpful?

Yes

Thursday, April 16th, 2015 AT 2:11 AM

SATURNV8

MEMBER
4 POSTS

I have the pieces of wire with the pin connectors on them. I need the wiring diagram of the fuse block and the 24 pin connector to know where the wires land

Images (Click to make bigger)

SPONSORED LINKS

Was this

answer

helpful?

Yes

Thursday, April 16th, 2015 AT 3:39 AM

MHPAUTOS

MECHANIC
31,938 POSTS

Hope that this helps.

Images (Click to make bigger)

Was this

answer

helpful?

Yes

Wednesday, April 22nd, 2015 AT 6:56 AM

SATURNV8

MEMBER
4 POSTS

That is great the only thing is they are so small and when I try and enlarge them they get all cloudy.
Thank you but they need to be big enough so I can print them on a full size sheet of paper

Was this

answer

helpful?

Yes

Wednesday, April 22nd, 2015 AT 7:58 AM

MHPAUTOS

MECHANIC
31,938 POSTS

That is the only format the system will allow me to sent the pics in, I have to use a screen shot from a master program that will not allow me to cut and paste any larger.