1997 Oldsmobile Cutlass Pulls to left when accelerating.

Tiny
KEITHMORENZ
  • MEMBER
  • 1997 OLDSMOBILE CUTLASS
  • 3.1L
  • V6
  • FWD
  • AUTOMATIC
I just pulled my engine and transmission to replace flywheel and trans mission. I replaced the motor and transmission mounts with new. Everything is lined up properly. But when im driving and accelerate the front pulls to the left. When I let of the gas it pulls back to the right. What could be causing this?
Do you
have the same problem?
Yes
No
Sunday, March 23rd, 2014 AT 8:40 AM

3 Replies

Tiny
HMAC300
  • EXPERT
Recheck your work and make sure mounts are tight it may be a suspension problem causing it or just that the car was running so bad when you replaced everything n it starter to work like it was supposed to. I am assuming this in full throttle applications when it does this.
Was this
answer
helpful?
Yes
No
Sunday, March 23rd, 2014 AT 8:56 AM
Tiny
KEITHMORENZ
  • MEMBER
It was a bad ball joint on passenger side.
Was this
answer
helpful?
Yes
No
Tuesday, March 25th, 2014 AT 10:34 AM
Tiny
HMAC300
  • EXPERT
Ok well at least it's fixed now.
Was this
answer
helpful?
Yes
No
Tuesday, March 25th, 2014 AT 12:15 PM

Please login or register to post a reply.

Recommended Guides