Automatic transmission gear stuck at gear 3, wont change down or up and neutral indicator blinking when on drive, very slow take off
have the same problem?
Tuesday, November 15th, 2011 AT 12:29 PM
Have it further checked-could be a hung-up shift solenoid or valve body problem
Tuesday, November 15th, 2011 AT 1:52 PM
An error has been detected by the TCM and it is in "Limp Mode" You need to retrieve the trouble codes to find out what is wrong.?Usually is a faulty solenoid on the valve body. Attempting to drive under such conditions would cause further damage to the transmission and cause it to fail completely.
Please consider a donation if we helped you
Tuesday, November 15th, 2011 AT 2:05 PM
Check the pins in the valve body solenoids harness, if one pin is broken, replace the harness