1997 Ford Explorer Blinkers not working

1997 FORD EXPLORER
196,000 MILES • 6 CYL • 2WD • AUTOMATIC
Avatar
JADDAX
  • MEMBER
  • 2 POSTS
Blinkers were cutting off and on, now wont come on at all. I have replaced the Wiper/turn signal lever switch and the flasher relay. checked the fuse it is still good . Any suggestions would be appreciated. Thanks
Dec 1, 2015 at 11:54 AM
Advertisement
Avatar
HMAC300
  • CERTIFIED EXPERT
  • 48,601 POSTS
check your turn/hazard flasher that is in steering column. it's the switch assembly for hazard.
Dec 1, 2015 at 12:14 PM
Avatar
JADDAX
  • MEMBER
  • 2 POSTS
Is that the same as the wiper/signal switch lever? It has two connection one for the hazards switch the other for signal light and wiper control. That part I just replaced. Hazzard light come on blinking, but turn signal wont. I replaced the turn signal switch last year , was still under warranty so I went ahead and replaced
Dec 1, 2015 at 1:06 PM
Advertisement
Avatar
HMAC300
  • CERTIFIED EXPERT
  • 48,601 POSTS
no it is the hazard switch itself.
Dec 1, 2015 at 1:39 PM