96 Saturn

Tiny
JHUTTO00
  • MEMBER
  • 1996 SATURN SC1
  • 4 CYL
  • 2WD
  • MANUAL
Recetly purchased a 96 saturn for my GF to use as a work vehicle. The seller told us it needed a Slave cylinder. I replaced the slave an master cyl as a kit to avoid bleeding. I still have the same problem.

The car wont shift into gear while running. Its like the clutch isn't engaging. It grids when I try to put it into any gear.

please help.
Thursday, March 31st, 2011 AT 2:08 AM

3 Replies

Tiny
SATURNTECH9
  • MECHANIC
  • 30,869 POSTS
So is the brake pedal hard all the way down or does it drop some before it get's hard?If it's hard all the way down then you have a bad clutch pressure plate most likely.
Was this
answer
helpful?
Yes
No
Thursday, March 31st, 2011 AT 2:12 AM
Tiny
JHUTTO00
  • MEMBER
  • 2 POSTS
I'm assuming you mean the Clutch pedal. Yes it drops some as it goes down.
Was this
answer
helpful?
Yes
No
Thursday, March 31st, 2011 AT 2:21 AM
Tiny
SATURNTECH9
  • MECHANIC
  • 30,869 POSTS
Yes the clutch pedal I miss spoke. So the clutch pedal drops down with no pressure some before it gets pressure?If so there is your problem.
Was this
answer
helpful?
Yes
No
Thursday, March 31st, 2011 AT 4:17 AM

Please login or register to post a reply.

Sponsored links