1996 Nissan Hardbody Standard. Gear problems.

Tiny
MARS58
  • MEMBER
  • 1996 NISSAN HARDBODY
So all of my gears from 1, 2, 4, 5 & R all works fine, but when I switch to 3 nothing happens. Is it something wrong in my engine? Electrical? Or transmission. Its been like this for awhile. I tried to check the electrical but it was pretty confusing to look at. And isn't if its the transmission, all of my gears should have been messed up? I really need to figure this out.
Do you
have the same problem?
Yes
No
Thursday, July 4th, 2013 AT 5:09 PM

9 Replies

Tiny
HMAC300
  • MECHANIC
  • 48,606 POSTS
Automatic or manual? If automatic it may be electrical
Was this
answer
helpful?
Yes
No
Friday, July 5th, 2013 AT 7:03 AM
Tiny
MARS58
  • MEMBER
  • 5 POSTS
Its manual. Oh and its 1990. Not 1996.
Was this
answer
helpful?
Yes
No
Sunday, July 7th, 2013 AT 11:38 PM
Tiny
HMAC300
  • MECHANIC
  • 48,606 POSTS
If you are just missing 3rd gear then it's a trans problem.
Was this
answer
helpful?
Yes
No
Monday, July 8th, 2013 AT 6:37 AM
Tiny
MARS58
  • MEMBER
  • 5 POSTS
Is there a way to test the transmission? Because the mechanic I asked said, there might be a leakage in my engine.
Was this
answer
helpful?
Yes
No
Tuesday, July 9th, 2013 AT 4:18 PM
Tiny
HMAC300
  • MECHANIC
  • 48,606 POSTS
Leakage in your engine would cause a clutch problem and it would be with all gears notjust 3rd. If you have a side cover to remove, then do that and take a look inside, it may be possible that the shifter isnt' shifting it to 3rd but I kind of doubt that.
Was this
answer
helpful?
Yes
No
Tuesday, July 9th, 2013 AT 4:32 PM
Tiny
MARS58
  • MEMBER
  • 5 POSTS
Well me and my dad open the spark plug for the 3rd gear and the gasoline is not being burnt? Could that be a sign?
Was this
answer
helpful?
Yes
No
Wednesday, July 10th, 2013 AT 4:44 PM
Tiny
HMAC300
  • MECHANIC
  • 48,606 POSTS
From what this sounds like you have an enginge problem not a transmission what is it? Engine or transmission if your spark plug is blackened/covveredin oil /fouled then check compression and scan for codes.
Was this
answer
helpful?
Yes
No
Thursday, July 11th, 2013 AT 5:08 AM
Tiny
MARS58
  • MEMBER
  • 5 POSTS
Could this be a sign for an engine top overhaul?
Was this
answer
helpful?
Yes
No
Saturday, August 24th, 2013 AT 5:34 PM
Tiny
HMAC300
  • MECHANIC
  • 48,606 POSTS
Check compression first
Was this
answer
helpful?
Yes
No
+1
Saturday, August 24th, 2013 AT 6:25 PM

Please login or register to post a reply.

Sponsored links