Sensor locations

Tiny
GOFFERS1
  • MEMBER
  • 1996 DODGE CARAVAN
  • 6 CYL
  • 2WD
  • AUTOMATIC
  • 97,000 MILES
I have a 1996 dodge caravan and would like to know where the sensors are located.

-the baro sensor
-map sensor
- throttle position sensor

Does anyone know where I can find this information?

Thanks.
Wednesday, May 4th, 2011 AT 10:39 PM

5 Replies

Tiny
WRENCHTECH
  • MECHANIC
  • 20,757 POSTS
The MAP and the Baro are one in the same.
TheTPS is mounted on the throttle body
Was this
answer
helpful?
Yes
No
+3
Wednesday, May 4th, 2011 AT 10:51 PM
Tiny
GOFFERS1
  • MEMBER
  • 21 POSTS
If the baro sensor and map sensor are the same, then why does the coding give two different code numbers. 13 is shown as a map sensor and 61 is shown as a baro sensor. I have had both replaced in the past, so there must two.
Was this
answer
helpful?
Yes
No
Wednesday, May 4th, 2011 AT 11:06 PM
Tiny
WRENCHTECH
  • MECHANIC
  • 20,757 POSTS
If you bought 2 separate sensors, then you got ripped off.
Was this
answer
helpful?
Yes
No
Wednesday, May 4th, 2011 AT 11:13 PM
Tiny
GOFFERS1
  • MEMBER
  • 21 POSTS
Here is what the diagnostic codes say:
†13* MAP sensor or vacuum line may not be working
†61 "Baro" sensor open or shorted

Is this the same sensor that is giving two different codes?
I'm really confused because the mechanic told me that it was two different sensors.

Another question, the diagram for the TPS does not look like my car engine at all. I think this must be way over my head.

Thanks.
Was this
answer
helpful?
Yes
No
+1
Thursday, May 5th, 2011 AT 12:24 AM
Tiny
WRENCHTECH
  • MECHANIC
  • 20,757 POSTS
If you gave me the correct information, then I gave you the correct information.
Was this
answer
helpful?
Yes
No
-1
Thursday, May 5th, 2011 AT 12:26 AM

Please login or register to post a reply.

Sponsored links