I have a 95 Nissan Truck XE V6 that I am losing oil pressure in I have put thicker oil in but it drops to zero

Tiny
LIKEMACK
  • MEMBER
  • 1995 NISSAN TRUCK
I have put in a pressure gauge
Wednesday, February 1st, 2012 AT 12:02 AM

7 Replies

Tiny
RASMATAZ
  • MECHANIC
  • 75,992 POSTS
Check the oil pressure with a mechanical gauge to rule the oil pressure switch, engine bearings and oil pump
Was this
answer
helpful?
Yes
No
Wednesday, February 1st, 2012 AT 12:05 AM
Tiny
LIKEMACK
  • MEMBER
  • 15 POSTS
I have put a mechanicl gauge on it.
Was this
answer
helpful?
Yes
No
Wednesday, February 1st, 2012 AT 1:07 AM
Tiny
MHPAUTOS
  • MECHANIC
  • 31,938 POSTS
What is the actual reading cold idle and hot idle.
Was this
answer
helpful?
Yes
No
Wednesday, February 1st, 2012 AT 11:15 AM
Tiny
LIKEMACK
  • MEMBER
  • 15 POSTS
Cold idle is 60 hot idle is 0
Was this
answer
helpful?
Yes
No
Wednesday, February 1st, 2012 AT 3:57 PM
Tiny
RASMATAZ
  • MECHANIC
  • 75,992 POSTS
Check the engine bearing clearances
Was this
answer
helpful?
Yes
No
Wednesday, February 1st, 2012 AT 7:45 PM
Tiny
LIKEMACK
  • MEMBER
  • 15 POSTS
Im assuming I have to pull the engine to do that?
Was this
answer
helpful?
Yes
No
Wednesday, February 1st, 2012 AT 8:14 PM
Tiny
LIKEMACK
  • MEMBER
  • 15 POSTS
About the end of summer I changed the oil and put in synthetic oil and that's when I lost the oil pressure. If that would tell you anything the trick has 130000
Was this
answer
helpful?
Yes
No
Thursday, February 2nd, 2012 AT 3:54 AM

Please login or register to post a reply.

Sponsored links