BECOME A MEMBER
Sign up with Facebook
I agree to the
Login with Facebook
NOT A MEMBER?
Installing lifters what needs to be done before putting them in
1995 MERCURY TRACER
Want to install new lifters what needs to be done before installing them anything special
have the same problem?
Friday, September 23rd, 2011 AT 8:03 PM
Just make sure to properly lubericate them and the cam. I have always used STP oil treatment to do so. It is very heavy and provides luberication until oil makes its way to everything.
Friday, September 23rd, 2011 AT 8:05 PM
to post a reply.
Related Camshaft Lifter Replace/Remove Content
Remove Lifters In 1.9
I Have A 1995 Mercury Tracer, And I Think One Of The Lifters Is Dropping The Oil, It Makes Rattles When You Start It Up For About 5 Min....
Lifter Ticking All Rpm And Low Speed Hesitstion
The Car Sat For A Year Changed Oil And Have Driven 50 Miles Or More It Still Ticks Its A Very Low Milage Car For The Year Can It Be Fixed...
How Can U Tell If The Lifters R Bad
I Removed All The Lifters And They Appear To Be Fine And R All Within Spec On Feeler Gauge If These Were A Problem In This Car How Do I Know...
1995 Mercury Tracer Is It The Timing Belt?
So About 1 And Half Months Ago I Put Brand New Spark Plugs And Wires On My Car And It Had Been Running Great After That. A Little While...
1995 Mercury Tracer Valve Cost
The Timing Belt Broke While I Was Driving And Bent Some Valves Up. Does Anyone Know What The Average Price Of A Valve Is Each. And How Hard...
Ask a Car Question. It's Free!
Camshaft Sensor Replacement
Find a car manual for your car
Terms & Conditions
© 1999 - 2018 2CarPros, Inc.