• Tiny
  • tat2djarhead
  • 1995 Honda Prelude
  • 4 CYL
  • 2WD
  • manual
  • 80,000 miles

I have a 1995 Honda Prelude SE with a 2000 VTEC engine. My fans will not come on. I have replaced the thermostat and the relay. Checked all fuses and they all are good. When I take the relay out and put a fuse in the spot to jump it the fan kicks on and stays on. Which it should if the fan is good. Also I believe this would tell me that all the wiring is good. I am stumped. Please help me.

Do you
have the same problem?
Monday, February 28th, 2011 AT 12:38 AM

1 Reply

  • Tiny
  • KHLow2008
  • Expert
  • 41,994 posts

The relay is not being activated and it could be due to a faulty fan switch or its wiring circuit. Disconnect the fan switch and use a jumper across the wire terminals. Turn ignition on, if fan works, you need to check the fan switch.

Was this
Monday, February 28th, 2011 AT 3:05 PM

Please login or register to post a reply.

Similar Questions