ive pulled all brackets, inspection cover, and sway bar and the pan is still stuck. how do i pull the pick up tube to get the pan down
Oct 3, 2012 at 7:32 PM
how do i pull the oil pick up tube in order to get the oil pan off?
1995 CHRYSLER CONCORDE
TYLERWEDEL
- MEMBER
- 8 POSTS
- FOLLOW
Advertisement
Repair Safety Notice:
This information is for general instructional purposes only. Vehicle repair can be dangerous.
Verify all information, follow manufacturer service procedures, use proper tools and safety equipment,
and consult a qualified repair shop when needed.
The gasket would tend to stick and you need a wooden block or mallet to tap the oil pan loose to get it off. The removal procedure does not mention anything about removing the pickup tube.
Oct 3, 2012 at 7:51 PM
i tried that and it still wont budge
Oct 3, 2012 at 8:09 PM
Advertisement
the pan is stuck on the pick up tube and the bell housing for the trans
Oct 3, 2012 at 8:11 PM
Check and ensure all bolts have been removed and try tapping harder. Even if the pickup tube is stuck, you should be able to have the oil pan dislodged from its stuck position.
Oct 3, 2012 at 8:46 PM
Advertisement
ok thanks
Oct 3, 2012 at 9:02 PM