HOW DO I PULL THE OIL PICK UP TUBE IN ORDER TO GET THE OIL PAN OFF?

  • Tiny
  • tylerwedel
  • 1995 Chrysler Concorde
  • 175,000 miles

Ive pulled all brackets, inspection cover, and sway bar and the pan is still stuck. How do I pull the pick up tube to get the pan down

Wednesday, October 3rd, 2012 AT 7:32 PM

5 Answers

  • Tiny
  • KHLow2008
  • Expert
  • 41,976 posts

The gasket would tend to stick and you need a wooden block or mallet to tap the oil pan loose to get it off. The removal procedure does not mention anything about removing the pickup tube.

Was this
answer
helpful?
Yes
No
Wednesday, October 3rd, 2012 AT 7:51 PM
  • Tiny
  • tylerwedel
  • Member

I tried that and it still wont budge

Was this
answer
helpful?
Yes
No
Wednesday, October 3rd, 2012 AT 8:09 PM
  • Tiny
  • tylerwedel
  • Member

The pan is stuck on the pick up tube and the bell housing for the trans

Was this
answer
helpful?
Yes
No
Wednesday, October 3rd, 2012 AT 8:11 PM
  • Tiny
  • KHLow2008
  • Expert
  • 41,976 posts

Check and ensure all bolts have been removed and try tapping harder. Even if the pickup tube is stuck, you should be able to have the oil pan dislodged from its stuck position.

Was this
answer
helpful?
Yes
No
Wednesday, October 3rd, 2012 AT 8:46 PM
  • Tiny
  • tylerwedel
  • Member

Ok thanks

Was this
answer
helpful?
Yes
No
Wednesday, October 3rd, 2012 AT 9:02 PM

Please login or register to post a reply.

Similar Questions