1994 Pontiac Firebird Driveshaft Compatibility

Tiny
3N1GM4
  • MEMBER
  • 1994 PONTIAC FIREBIRD
  • V6
  • RWD
  • MANUAL
  • 160,000 MILES
I am trying to find out if a driveshaft from an 83 v8 firebird is compatible with a 94 v6 firebird. My current driveshaft is a 2 piece and the 83s is a single if the matters. According to a forum I checked out they say an 82-92 will fit a 93-02 but I want to be sure before driving the 50 miles to get the replacement.
Do you
have the same problem?
Yes
No
Wednesday, June 17th, 2015 AT 10:27 AM

3 Replies

Tiny
HMAC300
  • EXPERT
If it's a two piece you have to stick with a two piece otherwise pinion angle will be off and you'll blow driveshaft's.
Was this
answer
helpful?
Yes
No
Wednesday, June 17th, 2015 AT 12:29 PM
Tiny
3N1GM4
  • MEMBER
Really? When I search online for replacements a lot of sites come up with single piece replacements for the car such as this one.
http://www.ccidriveline.com/gm-chevrolet/firebird---camaro-v-6-replacement-drive-shaft-94-98.html
Was this
answer
helpful?
Yes
No
Wednesday, June 17th, 2015 AT 4:37 PM
Tiny
HMAC300
  • EXPERT
Guess I'm wrong then try the one you think will fit.
Was this
answer
helpful?
Yes
No
Wednesday, June 17th, 2015 AT 4:40 PM

Please login or register to post a reply.

Recommended Guides