1994 MITSUBISHI MIGHTY MAX
25,000 MILES
Avatar
GHAWK122
  • MEMBER
  • 5 POSTS
Where is the location of the PCV valve, EVAP canister, oxygen sencor and the EGR valve on a 2.4?
Mar 2, 2013 at 9:47 AM
Advertisement
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.
Avatar
ASEMASTER6371
  • AUTOMOTIVE REPAIR CONTRIBUTOR
  • 52,796 POSTS
pcv is on the valve cover. hose goes to the intake manifold

evap cannister is down by the fuel tank. it contains valves and solenoids.

egr is on the back of the motor. it connects to the exhaust and intake systems.

Roy
Mar 2, 2013 at 2:11 PM
Avatar
GHAWK122
  • MEMBER
  • 5 POSTS
Thank you very much. I don't know much about these 4 cylinder engines. I grew up on chev. Small blocks. Them I can work... Also is that oxygen sencor in the cannister are by the EGR?

Thank you again for your help
Guess I need to get a manual..
Gary
Mar 2, 2013 at 10:10 PM
Advertisement
Avatar
ASEMASTER6371
  • AUTOMOTIVE REPAIR CONTRIBUTOR
  • 52,796 POSTS
o2 sensor is in the exhaust pipe. look for a sensor screwed into the exhaust by the manifold or down a little

Roy
Mar 2, 2013 at 10:54 PM
Avatar
GHAWK122
  • MEMBER
  • 5 POSTS
Thank you again. Found everything just where you said. You have been very helpful to this old man. Hope you have a nice evening....
Mar 3, 2013 at 12:28 AM
Advertisement