SPONSORED LINKS

Why dose ow Lancer stall in drive

Tiny
TONIWITHINGTON
  • MEMBER
  • 1994 MITSUBISHI LANCER
  • 173,000 MILES
We have a mitsabishi lancer 1994 1600 carborated automatic it is stalling in drive and takes off rougth but idles well in park and drives well once its moveing what can I try
Saturday, September 22nd, 2012 AT 7:21 AM

3 Replies

Tiny
KHLOW2008
  • MECHANIC
  • 41,815 POSTS
Does operating the A/C makes any difference?
What is the idling speed in Park/Neutral and when gears engaged?
Does transmission jerks when upshifting?
Did this occur after any repairs?
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Saturday, September 22nd, 2012 AT 8:29 AM
Tiny
TONIWITHINGTON
  • MEMBER
  • 2 POSTS
No a/c have turned idle speed up well above 500 hundred in gear made no diffrance, dosnt jerk or slip through gear change auto seems fine hasnt had any repairs just started doing it out of the blue
Was this
answer
helpful?
Yes
No
Sunday, September 23rd, 2012 AT 1:03 AM
Tiny
KHLOW2008
  • MECHANIC
  • 41,815 POSTS
Idling speed should be at least 650 rpm when gears are engaged.

If idling in neutral is not as smooth as it shold be, engaging gears can result in stalling. Any difference when in R and D?

A fault in the transmission can cause this as well.

I would start wiht the basics, a tune-up and valve adjustment, igntion timing checks/adjustments.
Was this
answer
helpful?
Yes
No
Sunday, September 23rd, 2012 AT 4:47 AM

Please login or register to post a reply.

Related Engine Stall At Idle Content

Engine Stalls After Dead or New Battery
GUIDE
Engine Stalls After Dead or New Battery
So you installed a new battery and now the engine stalls? You have done nothing wrong because believe it or not this is normal. The engine computer has a learning cycle...
VIEW MORE

Sponsored links