BECOME A MEMBER
Sign up with Facebook
I agree to the
Login with Facebook
NOT A MEMBER?
Ive replace the light bulbs for the lisence.
1994 JEEP CHEROKEE
Ive replace the light bulbs for the lisence plate and chekced the fuse on the junction box and it looked good. What else could be the problem
Saturday, November 3rd, 2012 AT 10:33 PM
The ground could be open between the bulb socket and ground point-see license plate circuit below-
Images (Click to enlarge)
Saturday, November 3rd, 2012 AT 10:45 PM
to post a reply.
Related Fuse Panel Content
Relay Panel Under Dash Right Of Steering Column
I Remove A Small Black Relay Instead Of The Red One That I Needed. Now I Do Not Know Which Slot It Goes Into.
Step by step guide on how automotive fuses work, this information pertains to all vehicles.
1991 Jeep Cherokee Fuse Box
One Of The Fuses Melted Inside My Fuse Box Inside The Car. The Port Was For My Running Lights. I Have Replaced The Ports With A New Plug In...
Inside) Fuse Block Circuit Id
Hello, I Have A Parasitic Draw And The Fuse Panel Dose Not Give An Circuit Id For The Fuse Number. Someone Plz Help Me Even Mitchell On...
1996 Jeep Cherokee Ignition Off Draw
My Jeep (grand Cherokee Ltd) Is Drawing About 300ma When The Ignition Is Off And Flattening The Battery After A Couple Of Days. I Removed...
1994 Jeep Cherokee Ignition Switch
When I Turned The Ignition On My '94 Cherokee This Morning, It Turned All The Way Past The Usual Point Of Ignition. The Usual Electrical...
Ask a Car Question. It's Free!
How to Use a Test Light
Step by Step video GMC Yukon XL 2000-2006
Find a car manual for your car
Terms & Conditions
© 1999 - 2018 2CarPros, Inc.