BECOME A MEMBER
Sign up with Facebook
I agree to the
Login with Facebook
NOT A MEMBER?
1994 GEO TRACKER
When I start the car it idles high but when I unplug the vacuum from the MAP sensor it idles good what could be wrong?
have the same problem?
Thursday, July 5th, 2012 AT 12:27 AM
Do you have any codes in the computer?Also have you checked for vacuum leaks yet?
Thursday, July 5th, 2012 AT 12:41 AM
No codes and I just replaced the vacuum lines
Thursday, July 5th, 2012 AT 12:44 AM
I would get a can of carb spray let it idle and spray around all vacuum sources intake manifold hoses etc. If the rpms go down it stumbles or dies you found a vacuum leak.
Thursday, July 5th, 2012 AT 4:26 PM
to post a reply.
Related MAP Sensor Content
Can A 97 Geo Tracker Engine Fit Into A 96 Geo Tracker?
I Crashed The 97 Geo Tracker But The Engine Is Still In Running Condition So Now I'm Trying To Take The 97 Engine Out And Put It In The 96...
Recently Replaced The Engine In 95 Geo Tracker Getting Spark It's Lighting Up And I Can Jump The Cylanoid To Turn It Over But I'm Only...
Ecm Chip That Would Increase Horsepower?
On Your Homepage I Found An Ad For An Ecm Chip That Would . Increase Horsepower By 60 & Mileage By 7mpg. Do You Guys Subscribe To These...
What Is The Most Common Cause Of The Starter Not...
The Battery Is Fine. Occasionally The Starter Will Engage And When It Does It Starts Just Fine.
Trying To Set The Cam And Crank Up To Put A Timing...
Trying To Set The Cam And Crank Up To Put A Timing Belt In Time.
Ask a Car Question. It's Free!
Topdon OBD2 Scanner Review - This thing rocks
Code Read Retrieval/Clear Scion XD
Check Engine Light
Find a car manual for your car
© 1999 - 2017 2CarPros, Inc.