how to replace intake manifold gasket on 1994 ford probe gt 2.5 liter v6
Aug 11, 2011 at 4:05 PM
intake manifold gasket
1994 FORD PROBE
YOUNGR3YO
- MEMBER
- 1 POST
- FOLLOW
Advertisement
Repair Safety Notice:
This information is for general instructional purposes only. Vehicle repair can be dangerous.
Verify all information, follow manufacturer service procedures, use proper tools and safety equipment,
and consult a qualified repair shop when needed.
Removal
Release fuel pressure. See FUEL PRESSURE RELEASE . Disconnect negative battery cable. Remove air cleaner and air induction tubes. Mark and remove vacuum hoses and wiring harness connectors as necessary.
Disconnect throttle cable from throttle body. Disconnect fuel pressure line from fuel rail. Remove fuel return line from pressure regulator. Disconnect EGR tube. Disconnect PCV valve. Remove intake manifold nuts/bolts in 2 steps. Remove intake manifold.
Release fuel pressure. See FUEL PRESSURE RELEASE . Disconnect negative battery cable. Remove air cleaner and air induction tubes. Mark and remove vacuum hoses and wiring harness connectors as necessary.
Disconnect throttle cable from throttle body. Disconnect fuel pressure line from fuel rail. Remove fuel return line from pressure regulator. Disconnect EGR tube. Disconnect PCV valve. Remove intake manifold nuts/bolts in 2 steps. Remove intake manifold.
Aug 11, 2011 at 5:59 PM