Have a problem with EGR silnoid got new one.

Tiny
AD61356TD
  • 1993 PONTIAC FIREBIRD
  • 206,000 MILES

Have a problem with egr silnoid got new one replaced but still comes on and says 2, 3 not working so I changed ecu and still comes on and I replaced the air pump and still comes on what could it be?

Do you
have the same problem?
Yes
No
Sunday, November 18th, 2012 AT 8:29 PM

18 Replies

Tiny
ASEMASTER6371
  • EXPERT
  • 25,499 POSTS

Still comes on? Explain and stop throwing parts at it

Roy

Was this
answer
helpful?
Yes
No
Sunday, November 18th, 2012 AT 8:33 PM
Tiny
AD61356TD
  • MEMBER

Well I go down the road and service engine light comes on so I put my code reader on ti and it sayes number2 and 3 egr silinoid not working

Was this
answer
helpful?
Yes
No
Sunday, November 18th, 2012 AT 9:33 PM
Tiny
AD61356TD
  • MEMBER

The car runs rough when after light comes on

Was this
answer
helpful?
Yes
No
Sunday, November 18th, 2012 AT 9:35 PM
Tiny
AD61356TD
  • MEMBER

Light comes after you go about 3 mi.S

Was this
answer
helpful?
Yes
No
Sunday, November 18th, 2012 AT 9:36 PM
Tiny
ASEMASTER6371
  • EXPERT
  • 25,499 POSTS

You have a egr with the 3 solenoids on the top?

Roy

Was this
answer
helpful?
Yes
No
Sunday, November 18th, 2012 AT 10:25 PM
Tiny
AD61356TD
  • MEMBER

Yes 3 on it

Was this
answer
helpful?
Yes
No
Sunday, November 18th, 2012 AT 11:27 PM
Tiny
ASEMASTER6371
  • EXPERT
  • 25,499 POSTS

What was the code number?

Roy

Was this
answer
helpful?
Yes
No
Sunday, November 18th, 2012 AT 11:33 PM
Tiny
AD61356TD
  • MEMBER

72, 73, 74

Was this
answer
helpful?
Yes
No
Sunday, November 18th, 2012 AT 11:39 PM
Tiny
ASEMASTER6371
  • EXPERT
  • 25,499 POSTS

There is no code 72

73 is for the ac and 74 is for one of the solenoids.

Roy

Was this
answer
helpful?
Yes
No
Sunday, November 18th, 2012 AT 11:46 PM
Tiny
AD61356TD
  • MEMBER

I will have to put code reader back to make sure what they are I will get back to ya

Was this
answer
helpful?
Yes
No
Monday, November 19th, 2012 AT 12:01 AM
Tiny
AD61356TD
  • MEMBER

The codes are75/76/77 hope you canfind out what it is thanks

Was this
answer
helpful?
Yes
No
Monday, November 19th, 2012 AT 9:52 PM
Tiny
AD61356TD
  • MEMBER

Did you get my email?

Was this
answer
helpful?
Yes
No
Tuesday, November 20th, 2012 AT 8:15 PM
Tiny
ASEMASTER6371
  • EXPERT
  • 25,499 POSTS

Sorry, was away, checking

Was this
answer
helpful?
Yes
No
Tuesday, November 20th, 2012 AT 8:16 PM
Tiny
ASEMASTER6371
  • EXPERT
  • 25,499 POSTS

This is the chart

Was this
answer
helpful?
Yes
No
Tuesday, November 20th, 2012 AT 8:19 PM
Tiny
AD61356TD
  • MEMBER

So what should I do to fix it?

Was this
answer
helpful?
Yes
No
Tuesday, November 20th, 2012 AT 9:01 PM
Tiny
ASEMASTER6371
  • EXPERT
  • 25,499 POSTS

At this point, I would ohm out the wires back to the computer. If they are ok, then it looks like a failed computer

Roy

Was this
answer
helpful?
Yes
No
Tuesday, November 20th, 2012 AT 9:06 PM
Tiny
AD61356TD
  • MEMBER

Ok I will checkit out I will get back to you

Was this
answer
helpful?
Yes
No
Tuesday, November 20th, 2012 AT 9:48 PM
Tiny
AD61356TD
  • MEMBER

Well wires ok and still get 75/76/77/46

Was this
answer
helpful?
Yes
No
Wednesday, November 28th, 2012 AT 9:27 PM

Please login or register to post a reply.

Recommended Guides