SPONSORED LINKS

Rear hub and bearing assembly

Tiny
BUBBADICKENS
  • MEMBER
  • 1992 SATURN SL1
  • 4 CYL
  • 2WD
  • AUTOMATIC
How do I remove my rear hub and bearing assembly on my 1992 Saturn SL1. I took out the 4 bolts behind the flange but it still doesnt want to budge?
Friday, November 19th, 2010 AT 10:33 PM

2 Replies

Tiny
BLUELIGHTNIN6
  • MECHANIC
  • 16,542 POSTS
Removal steps are below
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Friday, November 19th, 2010 AT 10:42 PM
Tiny
SATURNTECH9
  • MECHANIC
  • 30,870 POSTS
If your only removing the hub and bearing like it sound's like your doing there is no need to loosen the knuckle bolt's and mess up your alignment. All you do is remove the four bolt's facing your drum or rotor and if it won't break loose spray some liquid wrench on the mating surface of the hub/bearing to the knuckle and let it soak for a while then use a hammer to break it loose by hitting where the drum or rotor goes on with the drum or rotor off.
Was this
answer
helpful?
Yes
No
-1
Saturday, November 20th, 2010 AT 5:59 PM

Please login or register to post a reply.

Related Bearing Hub Replace/Remove Content

Wheel Bearing Hub Replacement
VIDEO
Wheel Bearing Hub Replacement
Instructional repair video
Bearing Hub Replacement
GUIDE
Bearing Hub Replacement
A bearing hub is used to allow the wheel to rotate while supporting the weight of the car and is mounted to the front or rear of the suspension system. The hub consists of a...
VIEW MORE

Sponsored links