MAZDA MX5 92

  • Tiny
  • joseph kevinmarshall
  • 1992 Mazda MX5
  • 4 CYL

Window motor cables adrift. How to access
door panel, remove window motor, re-attatch
cables etc. HELP!

Wednesday, December 8th, 2010 AT 10:45 AM

1 Answer

  • Tiny
  • KHLow2008
  • Expert
  • 41,938 posts

WINDOW REGULATOR & MOTOR
CAUTION: Remove the door screen carefully so that it may be reused.

Removal & Installation
NOTE: Raise the door glass about 190 mm (7.5") from fully open position.

1. Disconnect the negative battery cable. See Fig. 10 and Fig. 11.
2. Remove screw in inner handle cover.
3. Remove screws in arm rest.
4. Remove speaker grille clips and pins. See Fig. 11. Remove speaker grill.
5. Remove door trim clips and pins. See Fig. 11. Remove door trim.
6. Remove inner door handle
7. Remove sealing pad.
8. Remove door screen.
9. Remove upper stop.
10. Remove door mirror cover and door mirror. See Fig. 12.
11. Remove front beltline molding. See Fig. 13.
12. Remove door glass.
13. Remove window regulator.
14. Remove glass guide.
15. Remove door weatherstrip.
16. Remove division channel.
17. Remove weatherstrip.
18. Remove quarter glass.
19. Remove speaker if necessary.
20. Remove dovetail, if necessary.
21. To install, reverse removal procedure. Adjust door glass. See
ADJUSTMENTS.

Was this
answer
helpful?
Yes
No
Thursday, December 9th, 2010 AT 3:32 PM

Please login or register to post a reply.

Similar Questions