BECOME A MEMBER
Sign up with Facebook
I agree to the
Login with Facebook
NOT A MEMBER?
1992 MAZDA MX3
I fixed timing in car because it died now doesnt have compression on cylinder 1 what could it be
have the same problem?
Tuesday, July 5th, 2011 AT 6:15 PM
If the timing belt broke and it's an interference engine, suspect bent valves. A cylinder leakage test will identify if the valves are not sealing.
Tuesday, July 5th, 2011 AT 6:45 PM
Yep, if you drive a Mazda until the belt breaks, very bad things happen.
Tuesday, July 5th, 2011 AT 7:08 PM
to post a reply.
Related Engine Compression Content
What Is Causing My Car To Fluctuate Idol And Try To...
So Here Is My Problem. I Have A 1992 Mazda Mx 3 With A 1.6l Inline Sohc Engine 98ci. It Has 178400 Miles On The Odo. For A While Now (i'd...
Engine Cylinder Compression Test - All Cars
Instructual repair video
A car's engine needs cylinder compression to run correctly. This compression is caused by the engine pistons traveling upward to the top of the cylinder bore and then...
1992 Mazda Mx3 Wont Crank
Engine Mechanical Problem 1992 Mazda Mx3 6 Cyl Front Wheel Drive Automatic 140000 Miles Car Was Running Great, I Switched It Off Went...
1992 Mazda Mx3 Wont Start In Park.
Transmission Problem 1992 Mazda Mx3 4 Cyl Automatic 92,000 Miles Hello, My Vechile Is Quit Old But Has Been Pretty Reliable Since The...
1992 Mazda Mx3 Doesn't Start
Engine Performance Problem 1992 Mazda Mx3 4 Cyl Front Wheel Drive Manual 180000 Miles For Some Reason My Car Doesnt Want To Start...
1992 Mazda Mx3 Erratic Idle After Warm Up
Was Having High Idle Issues (2000 Rpm). Replaced Isc (original Tested Open And Sludge Was Built Up Inside It). Now, Cold Start Is Fine...
Ask a Car Question. It's Free!
Low Compression Symptoms
Compression Test Without Gauge
Reasons for Low Compression
Find a car manual for your car
© 1999 - 2017 2CarPros, Inc.