Ignition Coil Resistance (Except MX-3 1.8L)
1. Remove primary and secondary leads from ignition coil. Using ohmmeter, check primary resistance between positive and negative terminals of coil. See Fig. 3. Resistance should be as specified in
IGNITION COIL RESISTANCE table. If resistance is not as specified,
replace ignition coil.
2. Check secondary resistance between (positive) terminal and coil tower. See Fig. 3. See IGNITION COIL RESISTANCE table. If resistance is not within specifications, replace coil.
Images (Click to make bigger)
SPONSORED LINKS
Sunday, January 2nd, 2011 AT 4:02 AM
