WHY IS MY 350 TBI MISSING AND CUTTING OFF?

  • Tiny
  • Bluerebel14
  • 1992 GMC TRUCK
  • 200,000 MILES

92 GMC pickup with a reman. 350 TBI engine misses at idle acceleration. Has plenty of power during driving conditions but cuts back and tries to die when de-celerating. While parked, if you put your foot on the brake and pull it into rev. Or forward and put a load on the engine, it cuts off. I've checked the EGR, changed the ECM, plugs, wires, fuel filter, 0 2 censor, distributor, rebuild the throttle body, and still have no luck. Any help would be appreciated.

Do you
have the same problem?
Yes
No
Thursday, February 2nd, 2012 AT 8:55 AM

2 Replies

  • Tiny
  • Mhpautos
  • EXPERT
  • 30,743 POSTS

Do you have any fault codes, you done a scan yet?

Was this
answer
helpful?
Yes
No
Thursday, February 2nd, 2012 AT 8:59 AM
  • Tiny
  • Rasmataz
  • MEMBER

-Check the fuel pressure if its within specs and throttle position sensor and manifold absolute pressure sensors

Also refer to this link: http://www.2carpros.com/articles/engine-hesitates

Was this
answer
helpful?
Yes
No
Thursday, February 2nd, 2012 AT 9:03 AM

Please login or register to post a reply.

Other Engine Stall Questions