1990 Mitsubishi Eclipse engine doesn't have any spark

1990 MITSUBISHI ECLIPSE
127,000 MILES • 4 CYL • 2WD • AUTOMATIC
Avatar
2CP-ARCHIVES
  • MEMBER
  • 4,540 POSTS
1990 Mitsubishi Eclipse GS 2.0 mileage: 127,000. My engine doesn't have any spark . I replaced the PCM module, crankshaft, camshaft sensor, wiring checked and grounds. The car will not run.
Nov 10, 2010 at 8:32 PM
Advertisement
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.
Avatar
2CP-ARCHIVES
  • MEMBER
  • 4,540 POSTS
Here are some things to have checked: 1. Check to see if the timing belt/chain has failed, 2. Check for ignition spark at spark plugs, 3. Check for fuel pressure, 4. Scan P.C.M. (computer) for fault or error codes. The information should pinpoint the mal functioning components.
Nov 10, 2010 at 8:34 PM
Avatar
RASMATAZ
  • AUTOMOTIVE REPAIR CONTRIBUTOR
  • 75,992 POSTS
No snapping blue spark continue to troubleshoot the ignition system-power input to the coil/coil packs,coil's resistances,cap and rotor,distributor pick-up coil, ignition control module, cam and crank sensors and computer Note: If it doesn't apply disregard it and keep testing
Nov 12, 2010 at 11:16 AM
Advertisement