Troubleshooting

SLEEZY

1990 MAZDA 626
4 CYL
FWD

Can the CV/universal joints cause the vehicle to vibrate, or unusual driving condition. When accelerating?

Do you

have the same problem?

Yes

No

Friday, February 4th, 2011 AT 11:26 AM

1 Reply

HMAC300

EXPERT
49,815 POSTS

Yes, to testfor this try turning your steering wheel very slightly when going down the road one way or another. When the /if the vibration is gone then it is normally the side you turn to. Also check for broken /torn boots on the axle. It can also be wheel bearings causing this.

Please login or register to post a reply.

1991 Mazda 626 Split Cv Boots

Drive Train Axles Bearings Problem 1991 Mazda 626 4 Cyl Front Wheel Drive Manual 120000 Miles My Front Cv Boots Are Split, But The Cv...

Asked by racheljlc ·

1 ANSWER

1991

MAZDA 626

GUIDE

CV Axle Joint Symptoms

Front wheel drive and independent rear suspension cars are designed with CV axles. These axles allow the movement of suspension parts while delivering engine power to the...

2001 Mazda 626 Can Not Free Cv Shaft From Drivebox

Drive Train Axles Bearings Problem 2001 Mazda 626 4 Cyl Two Wheel Drive Manual 118, 00 Miles Bought Cv Half Shaft Assys For Replacing...

Asked by Busted knuckles ·

1 ANSWER

2001

MAZDA 626

1994 Mazda 626 Cv Joints

Shakes Or Wobbles Problem 1994 Mazda 626 6 Cyl Front Wheel Drive Automatic 114000 Miles I Recently Failed Dc Dmv Inspection Because...

Asked by bradfullilove ·

1 ANSWER

1994

MAZDA 626

2000 Mazda 626 Cv Axles

Drive Train Axles Bearings Problem 2000 Mazda 626 6 Cyl Front Wheel Drive Automatic The Car Makes The Clicking Noise That A Cv Axle...

Asked by donna3173 ·

1 ANSWER

2000

MAZDA 626

2002 Mazda 626 Thought It Was A Cv Joint?

Drive Train Axles Bearings Problem 2002 Mazda 626 4 Cyl Front Wheel Drive Automatic 94000 Miles When Driving My Car If I Make Sharp...

Asked by simmerdown187 ·

1 ANSWER

2002

MAZDA 626

Troubleshooting

Can the CV/universal joints cause the vehicle to vibrate, or unusual driving condition. When accelerating?

1 Reply

Yes, to testfor this try turning your steering wheel very slightly when going down the road one way or another. When the /if the vibration is gone then it is normally the side you turn to. Also check for broken /torn boots on the axle. It can also be wheel bearings causing this.

Please login or register to post a reply.

Related CV Axle CV Joint Content

1991 Mazda 626 Split Cv Boots

2001 Mazda 626 Can Not Free Cv Shaft From Drivebox

1994 Mazda 626 Cv Joints

2000 Mazda 626 Cv Axles

2002 Mazda 626 Thought It Was A Cv Joint?

Recommended Guides