Repiace throttle body control sensor

Tiny
ANONYMOUS
  • 1990 CHEVROLET LUMINA
  • 125,450 MILES

Repiace throttle body control sensor

Friday, February 22nd, 2013 AT 11:13 PM

1 Reply

Tiny
BLUELIGHTNIN6
  • EXPERT
  • 17,032 POSTS

Greetings

Remove the air cleaner assembly along with the necessary duct work to gain access to the TPS. Unfasten the TPS attaching screws. If the TPS is riveted to the throttle body, it will be necessary to drill out the rivets. Remove the TPS from the throttle body assembly. If equipped, inspect the TPS O-ring and replace if necessary. With the throttle valve closed, install the TPS onto the throttle shaft. Rotate the TPS counterclockwise to align the mounting holes. Install the retaining screws or rivets. Tighten the retaining screws to 18 inch lbs. Install the air cleaner assembly and any other duct work that was removed.

Please consider a donation to help us answer more questions.
Was this
answer
helpful?
Yes
No
Sunday, February 24th, 2013 AT 5:35 AM

Please login or register to post a reply.

Related Throttle Body Questions

Help us by donating