How do I know is out of timming

Tiny
UVI22
  • MEMBER
  • 1989 ISUZU TROOPER
  • 200,000 MILES
I changed the head gasket this week took the head to a machine shop you know the works and after I put everything back together it won't start I think the timming is off but I'm not sure please help me
Do you
have the same problem?
Yes
No
Monday, December 26th, 2011 AT 7:15 PM

7 Replies

Tiny
ASEMASTER6371
  • EXPERT
Did you verify the timing marks?

Roy
Was this
answer
helpful?
Yes
No
Monday, December 26th, 2011 AT 8:40 PM
Tiny
UVI22
  • MEMBER
Yeah I did but they were hard to find don't know if I aline them the rigth way
Was this
answer
helpful?
Yes
No
Monday, December 26th, 2011 AT 8:49 PM
Tiny
ASEMASTER6371
  • EXPERT
Ok, lets back up. How did you align the marks?

Roy
Was this
answer
helpful?
Yes
No
Monday, December 26th, 2011 AT 9:20 PM
Tiny
UVI22
  • MEMBER
Well the top pully had a mark so I. Align it with a mark that's was on the top the battom damper I align it to zero
Was this
answer
helpful?
Yes
No
Monday, December 26th, 2011 AT 11:25 PM
Tiny
ASEMASTER6371
  • EXPERT
Look at the 2 files I sent and make sure the images are the same as you lined up

Roy
Was this
answer
helpful?
Yes
No
Tuesday, December 27th, 2011 AT 12:20 AM
Tiny
UVI22
  • MEMBER
Thanks Roy this is going to be a lot of help
Was this
answer
helpful?
Yes
No
Tuesday, December 27th, 2011 AT 12:34 AM
Tiny
ASEMASTER6371
  • EXPERT
Good luck
Was this
answer
helpful?
Yes
No
Tuesday, December 27th, 2011 AT 2:01 AM

Please login or register to post a reply.

Recommended Guides