SPONSORED LINKS

1986 Jeep Comanche power steering pump went out.

Tiny
CASHIN602
  • MEMBER
  • 1986 JEEP COMANCHE
  • 200,000 MILES
I guess the bearing inside worn out because screams loud, but my problem is I can't get the pulley off, I mean I tried impact driver, cheater bars, everything that allen bolt will not come loose.
i have been without a car for 2 weeks don't make no money because i'm on disablity. Can you help me please. Thank you
SPONSORED LINKS
Saturday, June 1st, 2013 AT 9:36 AM

1 Reply

Tiny
CARADIODOC
  • MECHANIC
  • 33,752 POSTS
What allen bolt are you referring to? You need a special pulley puller to get the pulley off. There should be a collar around the center hole, about an inch and a half in diameter. The tool grabs that collar.

When you press the pulley back on you have to use that same tool with a threaded insert so the force is on just the shaft, not the pump body. You also have to know how far to press the pulley onto the shaft. If it uses a serpentine belt, there will be a horrendous belt squeal if the pulley is at the improper depth by as little as 1/16".
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Saturday, June 1st, 2013 AT 8:46 PM

Please login or register to post a reply.

Sponsored links