SPONSORED LINKS

1974 Ford F-100.

Tiny
SLY_CESAR
  • MEMBER
  • 1974 FORD F-100
  • 6.0L
  • V8
  • RWD
  • AUTOMATIC
  • 270,000 MILES
Truck turns off when running
dont know if it was the post terminal that it doesnt pass enough current because its lose
or the switch where the key goes aint passing enough current
Monday, July 14th, 2014 AT 5:08 PM

3 Replies

Tiny
JACOBANDNICKOLAS
  • MECHANIC
  • 108,133 POSTS
Does it start right back up when after it stalls?
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Monday, July 14th, 2014 AT 7:48 PM
Tiny
SLY_CESAR
  • MEMBER
  • 2 POSTS
Doesn't turn on. I have to wait like 10mins to turn the key and then it turns on but I drive it and only lasts acouple minutes till it turns off again
Was this
answer
helpful?
Yes
No
Monday, July 14th, 2014 AT 8:04 PM
Tiny
JACOBANDNICKOLAS
  • MECHANIC
  • 108,133 POSTS
When it does this and won't restart, have you checked to see if the plugs are getting spark and fuel is getting to the carb?

I have to be honest, it has been awhile since I worked on one of these. However, I remember this type of problem really well. Every time this would happen, the ignition control module (the aprox 4"x4") box under the hood was the problem. They would go bad, heat up, and the engine would shut off.

Let me know if you lose spark. If you do, the ignition control module is my first guess.
Was this
answer
helpful?
Yes
No
Monday, July 14th, 2014 AT 8:59 PM

Please login or register to post a reply.

Sponsored links