HOW DO YOU REMOVE THE POWER WINDOW MOTORS ON A ?

1968 Ford Thunderbird

Tiny

Derek_1984

May, 24, 2012 AT 5:09 PM

I am replacing the power window motors on my 1968 Ford Thunderbird. I started with the driver's side front door. I am able to remove the interior trim panel. With the panel removed, I can see part of the power window motor. I cannot see or feel any hardware holding the motor in place. Also, I am not sure how to separate the motor gear from the window regulator.

FOUND 533 RELATED QUESTIONS

2 Answers

Tiny

hmac300

May, 24, 2012 AT 7:22 PM

On this to get that motor out you have to pull the back seat and the whatever side yu are replacing the panel as well. It will go all the way around to about halfway behind the top part of the back seat so that needs to be pulled out as well. Then just take the motor out. It is held in by 3 bolts if memeory serves me right. You may have to pull the window regulator out with it, it should unbolt from the window.

Tiny

hmac300

May, 24, 2012 AT 7:23 PM

Drivers door is similar the back ones are a bitch

Please login or register to post a reply.

Window Regulator and Motor Replacement Honda
Door Panel Removal & Speaker Replacement
Dynamat Door Installation