1991 Nissan Micra throttle body

Tiny
KINZ
  • MEMBER
  • 1991 NISSAN MICRA
  • 4 CYL
  • 2WD
  • MANUAL
  • 54,000 MILES
After fitting a throttle body, will any tuning be required or should the part be correctly calobrated.
Tuesday, February 3rd, 2009 AT 4:55 AM

1 Reply

Tiny
ZACKMAN
  • MECHANIC
  • 4,202 POSTS
Throttle body itself does not need adjustment, the throttle position sensor however needs to be adjusted. Signal voltage (ignition key ON, engine no running) should be between 0.45 - 0.55 volts. Rotate the TP sensor until specified voltage is achieved.
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Tuesday, February 3rd, 2009 AT 2:45 PM

Please login or register to post a reply.

Related Throttle Body Content

Throttle Actuator Bore Service
GUIDE
Throttle Actuator Bore Service
The throttle bore or throttle actuator as they are called on newer cars is used to meter the engine air intake thus controlling the engine RPM and power output via the gas...

Sponsored links