SPONSORED LINKS

86 Camaro replacing alternator and lower ball joints

Tiny
RUFIO1717
  • MEMBER
  • 1986 CHEVROLET CAMARO
I have a chevy camaro, 1986, 107,000 miles, v8 z28 IROC. The alternator and lower ball joints need replacing. I only have a few hundred dollars and no experience or tools. What do I need (parts / tools / manuals) to replace these parts? Also where can I find these things?
SPONSORED LINKS
Sunday, August 26th, 2007 AT 4:18 PM

1 Reply

Tiny
RASMATAZ
  • MECHANIC
  • 75,992 POSTS
Y R U changing the alternator-BJ can come later

If you just wanna replace it-you need the items:

Alternator/BJ /set so sockets/wrenches/pickle fork/ball pin hammer/blow torch/case of Bud you'll be needing it when you start banging on them BJ's. Good Luck
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Monday, August 27th, 2007 AT 5:59 AM

Please login or register to post a reply.

Related Ball Joint Replace/Remove Content

Ball Taper Joint Release
GUIDE
Ball Taper Joint Release
The car must be jacked up off the ground and supported on jack stands. You may need to remove the wheel to be able to access the ball joint more freely. There are two...

Sponsored links