1997 BMW Z3 Engin Stall while driving

Tiny
PETER130183
  • MEMBER
  • 1997 BMW Z3
  • 4 CYL
  • 2WD
  • MANUAL
  • 44,000 MILES
Hi,

recently (inside last 6 months) some times when I am pulling away in first the engin will appear to stall then recover but act as if it is in nutral, I will loose all drive and I will have to put it back to nutral and then back into first, the car will recover and drive away fine (before I get ripped for this its not that im not giving it enough gas and stalling the car myself).
At first I thought it was just the car needing a good service as it was getting close to that time so I put it in just before christmas. But today I was drving in 3rd and the engin seemed to cut out completly. I had to pull the car over and restart the engin. There are no strange sounds comming from the engin and it seems to tick over fine normally when left parked up and out of gear. The problem seems to becomming more frequent in the past month (might have happend 4 or 5 times). I asked the garage about it at the time of service and they didnt know what it could be as there were no errors showing in the onboard computer.

This is starting to worrie me now and I could really do with some advice as it is the first BMW I have owned so I am not sure if this is a common problem. Can any one please shed light on the problem or give me any ideas or tests I can perform

Cheers
Pete
Tuesday, January 8th, 2008 AT 5:58 AM

3 Replies

Tiny
DOCHAGERTY
  • MECHANIC
  • 9,601 POSTS
Pete, repost with the VIN please
Was this
answer
helpful?
Yes
No
Saturday, January 12th, 2008 AT 10:38 PM
Tiny
PETER130183
  • MEMBER
  • 4 POSTS
Hi Sorry this is going to sound really stupid but what is VIN?
Was this
answer
helpful?
Yes
No
Monday, January 14th, 2008 AT 9:32 AM
Tiny
DOCHAGERTY
  • MECHANIC
  • 9,601 POSTS
The vehicle identification number
Was this
answer
helpful?
Yes
No
Tuesday, January 22nd, 2008 AT 6:52 PM

Please login or register to post a reply.

Sponsored links