SPONSORED LINKS

2007 Toyota Camry slave and Master clutcg cylinder

Tiny
RLAZARO
  • MEMBER
  • 2007 TOYOTA CAMRY
  • 2.4L
  • 4 CYL
  • 2WD
  • MANUAL
Replaced the slave cylinder could not get air or of system. Want to change master. Clutch cylinder. Its completely loose but I have very little space. How do I get the master cylinder out? I have only a three inch opening. Please help
Tuesday, September 30th, 2014 AT 7:37 PM

3 Replies

Tiny
HMAC300
  • MECHANIC
  • 48,601 POSTS
See pics
Images (Click to make bigger)
Thumb
Thumb
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Wednesday, October 1st, 2014 AT 6:48 AM
Tiny
RLAZARO
  • MEMBER
  • 2 POSTS
Thanks I was able to swap master cylinder but I'm still having no pressure on clutch pedal. I'm trying to bleed the air out but no avail. Am I missing something? New slave new master all lines hooked up. What else could it be.
Was this
answer
helpful?
Yes
No
Friday, October 3rd, 2014 AT 9:41 AM
Tiny
HMAC300
  • MECHANIC
  • 48,601 POSTS
Try apower bleeder it should work if bled correctly. Was master bled prior to install if not it's still got air in system. See if slave is getting fluid from master when yo bleed it cold be the slave cylinder as well.
Was this
answer
helpful?
Yes
No
Friday, October 3rd, 2014 AT 12:52 PM

Please login or register to post a reply.

Related Transmission Clutch Master Cylinder Replace/Remove Content

VIEW MORE

Sponsored links