how do i replace struts on 2005 chevy malibu
Mar 13, 2011 at 4:08 AM
chevy 2005 malibu
2005 CHEVROLET MALIBU
ROBYADAO
- MEMBER
- 1 POST
- FOLLOW
Advertisement
Strut Assembly Replacement
Removal Procedure
Raise and support the vehicle. Refer to Vehicle Lifting.
Remove the front wheel.
Disconnect the stabilizer link from the strut.
Remove the strut to steering knuckle nuts.
If applicable, reposition the wheel speed sensor/ABS harness and bracket.
Remove the strut to steering knuckle bolts.
Remove the upper strut cap to body nuts.
Important: In order to prevent damage to the CV joint boot, place a shop towel over the CV joint.
Remove the strut from the vehicle.
Removal Procedure
Raise and support the vehicle. Refer to Vehicle Lifting.
Remove the front wheel.
Disconnect the stabilizer link from the strut.
Remove the strut to steering knuckle nuts.
If applicable, reposition the wheel speed sensor/ABS harness and bracket.
Remove the strut to steering knuckle bolts.
Remove the upper strut cap to body nuts.
Important: In order to prevent damage to the CV joint boot, place a shop towel over the CV joint.
Remove the strut from the vehicle.
Images (Click to enlarge)
Mar 14, 2011 at 7:25 AM
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.