SPONSORED LINKS

Darrin

Tiny
DARRIN LAWSON
  • MEMBER
  • 2004 KIA OPTIMA
  • 4 CYL
  • 2WD
  • MANUAL
  • 60,000 MILES
I hydro locked a 2.4l kia optima 2004 modle iv I had to put a new piston in it done with that got to the head need to no the toque speic for it and the sequince that the bolts need to be and the rest of the toque specs for the for the intake and the exhast sorry about the spelling please help if you can?
SPONSORED LINKS
Friday, May 20th, 2011 AT 3:57 PM

2 Replies

Tiny
DOCFIXIT
  • MECHANIC
  • 18,828 POSTS
See diagrams for head assume you are reusing bolts.
Exhaust 18-22 ft. Lbs
Intake 11-14 ft. Lbs.
Note head is torque to yield type
Images (Click to make bigger)
Thumb
Thumb
Was this
answer
helpful?
Yes
No
-1
Friday, May 20th, 2011 AT 5:35 PM
Tiny
WRENCHTECH
  • MECHANIC
  • 20,758 POSTS
As Doc pointed out, this is "torque to yeild" system which actually stretches the bolts and for that reason you should never try to re-use them. Every installation requires new bolts.
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Friday, May 20th, 2011 AT 5:39 PM

Please login or register to post a reply.

Related Piston Content

Replacing the Pistons and Rings
VIDEO
Replacing the Pistons and Rings
Instructional repair video
Piston Ring Replacement
GUIDE
Piston Ring Replacement
An engine's piston rings are used to seal the piston to the cylinder wall during the compression stroke. When a combustion event occurs these rings are forced against the...
VIEW MORE

Sponsored links