Replacing the starter.

CADILLAC562

MEMBER
2004 BMW 530I
114,000 MILES

I need instruction on how to replace the starter where I can do it myself. If possible from the top and not the under side. I dont have a lift and wont be able to do it from under the car.

Wednesday, October 12th, 2011 AT 5:16 AM

7 Replies

MHPAUTOS

MECHANIC
31,938 POSTS

I do not believe that this is possible short dismantling a fair proportion of the engine accessories and manifolds to get at it, I will pass it on to a BMW specialist just in case he has some solution for this problem.

SPONSORED LINKS

Was this

answer

helpful?

Yes

Wednesday, October 12th, 2011 AT 6:32 AM

RASMATAZ

MECHANIC
75,992 POSTS

Sorry for the bad news-you gonna have to go underneath to remove the reinforcement plate thru the front axle carrier -this is a must says Mit1-sorry

Was this

answer

helpful?

Yes

Wednesday, October 12th, 2011 AT 6:32 AM

CADILLAC562

MEMBER
3 POSTS

Do you have instructions on removing it if I go through the bottom of the vehicle?

Was this

answer

helpful?

Yes

Wednesday, October 12th, 2011 AT 12:44 PM

DOCHAGERTY

MECHANIC
9,601 POSTS

Send the last seven of the VIN so the car can be identified correctly.

Was this

answer

helpful?

Yes

Wednesday, October 12th, 2011 AT 2:32 PM

DOCHAGERTY

MECHANIC
9,601 POSTS

The M54 motor is usually quite easy to work on, but this operation could require the removal of the intake manifold to gain access to the starter bolts.