Rebuild

Tiny
ZELLDOG93
  • MEMBER
  • 2002 NISSAN SENTRA
  • 4 CYL
  • FWD
  • AUTOMATIC
  • 100,600 MILES
If I were to rebuild my engine due to water damage in the cylinders what parts would I need if I had to replace the piston rings
Monday, July 25th, 2011 AT 1:40 AM

4 Replies

Tiny
MHPAUTOS
  • MECHANIC
  • 31,937 POSTS
Engine gasket set, ring set, I would do the bearings as well, check condition of all hoses thermostat fit new plugs and all filters coolant and oil.
Was this
answer
helpful?
Yes
No
Wednesday, July 27th, 2011 AT 12:57 PM
Tiny
ZELLDOG93
  • MEMBER
  • 111 POSTS
Do you know a web site where I can order the parts from other then summit racing and jegs? And also what is the possibility that I would need to bore out the cylinders?
Was this
answer
helpful?
Yes
No
Wednesday, July 27th, 2011 AT 2:36 PM
Tiny
MHPAUTOS
  • MECHANIC
  • 31,937 POSTS
Try parts train, you will have to measure the bore to see if it requires boring.
Was this
answer
helpful?
Yes
No
Wednesday, July 27th, 2011 AT 10:33 PM
Tiny
ZELLDOG93
  • MEMBER
  • 111 POSTS
Ok thanks I will try that but I think I looked at parts train but I dont remember if they had the right parts for the right prices and I have a place to get my engine bored out that costs like $20 a hole
Was this
answer
helpful?
Yes
No
Wednesday, July 27th, 2011 AT 11:13 PM

Please login or register to post a reply.

Sponsored links