Ignition- key won't turn

DEBWISE

MEMBER
2003 JEEP LIBERTY

6 cyl Four Wheel Drive Manual 50000 miles

For a few months, the key will not turn in ignition occasionally, usually in cold weather. After repeated quick in and out thrusting with the key, it would eventually start. Now the key won't turn MOST of the time.

7 Replies

KEN L

MASTER CERTIFIED MECHANIC
42,895 POSTS

Hello

The cheapest solution to try here is to spray WD40 or equivalent light oil into the ignition lock cylinder and work the oil in very well with your key. If this does not help, there are other very common reasons why this issue is happening. You can find this information at our Car Repair Troubleshooting page. Just follow the link below...

https://www.2carpros.com/first_things/why_wont_my_ignition_switch_turn.htm

If that does not work you will need to replace the tumbler which is common here are the diagrams Below to get the job done.

If you need further assistance just let me know.

Cheers, Ken

Images (Click to make bigger)

SPONSORED LINKS

Was this

answer

helpful?

Yes

Thursday, March 26th, 2009 AT 2:25 PM

DEBWISE

MEMBER
1 POST

Yep had to replace the key tumbler thanks for the diagrams really helped me. I love this site BTW

Was this

answer

helpful?

Yes

Saturday, March 28th, 2009 AT 2:05 PM

HAYDENM13

MEMBER
3 POSTS
2002 JEEP LIBERTY
137,000 MILES

Check engine on. Scanned it but codes wouldn't read because there was a possible blown fuse. Checked all the fuses and all were fine. Someone suggested the key on key off method, but I don't know what that is.

Was this

answer

helpful?

Yes

Tuesday, March 6th, 2018 AT 7:51 PM (Merged)

ASEMASTER6371

MECHANIC
52,797 POSTS

Your reader may be bad. There is a fuse for the cigarette lighter that controls the aldl connector.

Pull the code and give us the number so we can further help you

Roy

Was this

answer

helpful?

Yes

Tuesday, March 6th, 2018 AT 7:51 PM (Merged)

HAYDENM13