You sure the fuel hoses are connected properly-if so it should spit out fuel -double check your work

Answered by rasmataz
68 questions asked

thanks for the quick response but like I said the original pump was doing the same thing before I did any work which makes me think there is something else that would make the pump throw fuel also I changed the whole assembly that comes all put together not just the pump

Response from cherzog
1 question asked

Are you sure you're not looking at the return line or that you have enough fuel in the tank?

Answered by Wrenchtech (expert)
14,729 answers provided

I am absolutely positive . I first took the line off at the fuel filter and nothing then off at the tank thinking it could be a blocked line ... nothing !Gauge reads over a quarter tank and covered the pump when I put it in .

Response from cherzog
1 question asked

Check the assembly itself and see if there is a hose connecting the pump to the rest of the assembly that could be bypassing.

Answered by Wrenchtech (expert)
14,729 answers provided