Bogging and sputtering

There are a number of things that will cause this, so we need to start by checking the fuel pressure and find out if it is low. Here is a guide that will help with this:

https://www.2carpros.com/articles/how-to-check-fuel-system-pressure-and-regulator

If the fuel pressure is okay, then we need to monitor the o2 sensor data and find out if this is lean.

https://www.2carpros.com/articles/repair-lean-mixture-codes-p0171-or-p0174-on-some-manufacturers

If it is not lean, then the next most probable issue is the torque converter has failed.

Basically, what happens is the converter stops pushing the fluid through the converter causing the input shaft to spin and it bogs the engine down.

Let's start with this info and we can go from there.

Thanks