1999 Toyota Camry Repair Question
Toyota Camry Starter Problem
REMOVE BATTERY AND TRAY
w/ CRUISE CONTROL SYSTEM: REMOVE CRUISE CONTROL ACTUATOR
Disconnect the actuator connector and clamp.
Remove the 3 bolts, and disconnect the actuator with the bracket.
3. REMOVE STARTER
Disconnect the starter connector.
Remove the 2 bolts, throttle cable clamp (A/T) and starter.
Remove the nut, and disconnect the starter cable. Torque: 37 Nm (380 kgf.cm, 27 ft.lbf)
Installation is in the reverse order of removal.
since you provided no info on motor, i assumed it was a 4 cylinder.
24,771 answers provided