REPLACE THE EGR VALUE, MAF SENSOR, ON A CHECK ENGINE LIGHT STILL ON CALLING FOR THE SAME CODES. I WAS TOLD GM HAS A COMMON PROBLEM WITH THIS. KEEP SHUTTING OFF WHEN I STOP. SLUGGISH DRIVING WHAT AM I'M MISSING HERE. PLEASE HELP
1999 Oldsmobile Aurora
Replace egr value maf sensor
Don't remember the codes now I think 102 104 for egr value and maf sensor
When you replaced the EGR, did you make sure the intake wasn't carboned up? Also, check all vacuum hoses to the EGR for carbon build up. Also, check the MAF sensor to make sure there is power to it.
Hi hope you can help, this is a general question. 2 wire sensors, crank and cam are referred to as inductive, magnetic, whilst 3 wire sensors are Hall effect. Can a inductive, magnetic ...
3 answers • 2010 All Other Makes All Other Models
2007 toyota camry 140k. Check engine light code Knock sensor. Reset and came back on right away. What could cause this other than the obviouse bad sensor or wire?
9 answers • 2007 Toyota Camry • 140 miles
I had a rough starting when cold issue. Checked the codes and discovered two codes for a lean condition in both banks. After not finding a vac leak, I replaced the MAF with a ...
2 answers • 2002 Chevrolet Silverado • 170,779 miles
Describe the type sensor of the Knock sensor is on this vehicle and how it should be tested.?
1 answer • 2002 Chrysler 300 • 100 miles