WHERE IS THE EGR POSITION SENSOR LOCATED AT.
1999 Ford Taurus • 168,547 miles
My taurus is a v6 24 valve.
Back by the the firewall towards the middle by the egr valve thats where they usually are.Theyhave hose going.to them and one hose comes from the exhaust.Usually the hoses fail and need to be replaced.Do you have any codes for the egr feed back sensor?If so what are the exact code numbers you have?
The codes I have are P 0401 P 1131 P0171 P 0174
I would start checking for vacuum leaks and the hoses to the egr pressure sensor.The P0401 is egr insufficient flow which could be a issue with the hoses to the feed back sensor.The P0171 and the P0174 is lean bank one and two could be caused by a vacuum leak.The P1135is o2 indicates lean again possible vacuum leak.
Hi hope you can help, this is a general question. 2 wire sensors, crank and cam are referred to as inductive, magnetic, whilst 3 wire sensors are Hall effect. Can a inductive, magnetic ...
3 answers • 2010 All Other Makes All Other Models
I have a 2000 bonneville ssei. It has 2 02 sensors. I get the code that says cat. sys. efficency level low bank 1. Is that the upstream 02 or the downstream 02
1 answer • 2000 Pontiac Bonneville • 150,000 miles
The service manual for my 1996 GMC Sierra tells me that my truck has four oxygen sensors. They are designated: Bank 1 Sensor 1, Bank 1 Sensor 2, Bank 1 Sensor 3, and, Bank 2 Sensor 1. ...
1 answer • 1996 GMC Sierra • 125,000 miles
I had a rough starting when cold issue. Checked the codes and discovered two codes for a lean condition in both banks. After not finding a vac leak, I replaced the MAF with a ...
2 answers • 2002 Chevrolet Silverado • 170,779 miles