Truck will turn over, but not start, something with the security system?

Tiny
CAROLEM
  • MEMBER
  • 1999 FORD F-250
  • 99,999 MILES
1999 Ford F250: Initially, the key would not turn. Starter switch was removed. Tried to start truck with a screwdriver. Truck will turn over, but not start. We think it is something with the security system. Is there a way to bypass this or some other solution? This is a regular key, not one that shows a visible chip.
Tuesday, July 10th, 2012 AT 11:31 PM

15 Replies

Tiny
SATURNTECH9
  • MECHANIC
  • 30,869 POSTS
There is not a PATS system on these trucks until 2005, no need for programming of any sort. Security will not lock out an ignition issue. Is the security light on?
Was this
answer
helpful?
Yes
No
+1
Wednesday, July 11th, 2012 AT 12:02 AM
Tiny
CAROLEM
  • MEMBER
  • 6 POSTS
Yes, the security light is on and blinking.
Was this
answer
helpful?
Yes
No
Wednesday, July 11th, 2012 AT 12:07 AM
Tiny
SATURNTECH9
  • MECHANIC
  • 30,869 POSTS
Is there a cylinder your turning or is the ignition cylinder out of it?
Was this
answer
helpful?
Yes
No
Wednesday, July 11th, 2012 AT 12:22 AM
Tiny
SATURNTECH9
  • MECHANIC
  • 30,869 POSTS
Also is it a super duty or regular F250?
Was this
answer
helpful?
Yes
No
Wednesday, July 11th, 2012 AT 12:23 AM
Tiny
SATURNTECH9
  • MECHANIC
  • 30,869 POSTS
Check out the info I posted says it uses a coded key so wont start with a screwdriver. You will have to replace the ignition cylinder and relearn the new key.
Was this
answer
helpful?
Yes
No
Wednesday, July 11th, 2012 AT 12:27 AM
Tiny
CAROLEM
  • MEMBER
  • 6 POSTS
@saturntech9
"Is there a cylinder your turning or is the ignition cylinder out of it?"

The cylinder is out.

"Also is it a super duty or regular F250?"

A regular F250.

Thanks so much for your time!
Was this
answer
helpful?
Yes
No
Wednesday, July 11th, 2012 AT 12:28 AM
Tiny
SATURNTECH9
  • MECHANIC
  • 30,869 POSTS
Read above what I posted you need a new cylinder to make it start.
Was this
answer
helpful?
Yes
No
Wednesday, July 11th, 2012 AT 12:30 AM
Tiny
CADIEMAN
  • MECHANIC
  • 3,544 POSTS
Ck for fuel pressure and spark
Was this
answer
helpful?
Yes
No
Wednesday, July 11th, 2012 AT 12:43 AM
Tiny
CAROLEM
  • MEMBER
  • 6 POSTS
I think you're right about the cylinder and then the key will have to be re-programed or a new key and new programming?
Was this
answer
helpful?
Yes
No
+1
Wednesday, July 11th, 2012 AT 12:44 AM
Tiny
SATURNTECH9
  • MECHANIC
  • 30,869 POSTS
Please read above cadieman they are trying to start it without a key or cylinder the security light is on.I also posted above that this truck uses a coded key to start it so a screwdriver isnt going to start it. So checking fuel pressure is useless at this point. Dont you agree?
Was this
answer
helpful?
Yes
No
Wednesday, July 11th, 2012 AT 12:46 AM
Tiny
SATURNTECH9
  • MECHANIC
  • 30,869 POSTS
What I would do is get a new cylinder then the old key I would use to code the new key even some hardware stores can do that. Let me know how it goes.
Was this
answer
helpful?
Yes
No
Wednesday, July 11th, 2012 AT 12:51 AM
Tiny
CAROLEM
  • MEMBER
  • 6 POSTS
From everything you've said, it sounds like that's exactly what we need to do. The hardware store is a fantastic suggestion and probably a bit less expensive than a locksmith!

I can't thank you enough for your time and all this good information. Really appreciate it and I will pop back in to let you know!
Was this
answer
helpful?
Yes
No
Wednesday, July 11th, 2012 AT 1:04 AM
Tiny
SATURNTECH9
  • MECHANIC
  • 30,869 POSTS
Your welcome iam here to help people fix there cars and save them money. Please let me know how it comes out I would love to hear how it came out.
Was this
answer
helpful?
Yes
No
Wednesday, July 11th, 2012 AT 1:07 AM
Tiny
CAROLEM
  • MEMBER
  • 6 POSTS
I have a family emergency and really needed to get the right info to get that truck repaired. You really made a difference for me and I will let you know.
Was this
answer
helpful?
Yes
No
Wednesday, July 11th, 2012 AT 1:10 AM
Tiny
SATURNTECH9
  • MECHANIC
  • 30,869 POSTS
Your welcome thats why iam here to help people in need and share my talents.
Was this
answer
helpful?
Yes
No
+1
Wednesday, July 11th, 2012 AT 1:33 AM

Please login or register to post a reply.

Sponsored links