1998 Saturn SL2 transmissions

BLACK LASH

MEMBER
1998 SATURN SL2

It wont go in to 2nd and when it does it slips out. It goes in to all the rest its a manual transmission. I recently pulled the engine to replace. The cluch and I put it back together. The way the book said. I checked. The shifter cables and they are fine

5 Replies

SATURNTECH9

MECHANIC
30,870 POSTS

How did it shift before you replaced the engine?

Was this

answer

helpful?

Yes

No

Thursday, October 17th, 2013 AT 10:17 PM

MAXIMILIAM

ADMIN
436 POSTS

It shifted smoothly the only other thing I can think it could be is that the transmission is going out

/black lash

SPONSORED LINKS

Was this

answer

helpful?

Yes

No

Friday, October 18th, 2013 AT 11:20 PM

SATURNTECH9

MECHANIC
30,870 POSTS

On the transmission side of the shift cables where the crimps are can you see bare cable?

Was this

answer

helpful?

Yes

No

+1

Saturday, October 19th, 2013 AT 7:16 AM

MAXIMILIAM

ADMIN
436 POSTS

Yes I can see bare cable I have the cable out right now it looks like its in good condition. But what I can't figer out is why it would work fine one week and not the next.

/black lash

Was this

answer

helpful?

Yes

No

-1

Saturday, October 19th, 2013 AT 9:18 AM

SATURNTECH9

MECHANIC
30,870 POSTS

If the cable is showing bare cable then the cable has stretched pulled from the crimp and can cause shifting issues. If the linkage and cables are moving like it should it could be the shift tower on the transmission or the transmission itself.