SPONSORED LINKS

1998 Honda Accord clutch Master cylinder, and slave cylin

Tiny
TERRISB79
  • MEMBER
  • 1998 HONDA ACCORD
  • 4 CYL
  • 2WD
  • MANUAL
  • 110,000 MILES
Clutch pedal had no pressure, and changed the slave cylinder, and the master cylinder. Still no pressure in the pedal. Both parts brand new.
Monday, February 18th, 2008 AT 11:37 PM

4 Replies

Tiny
RASMATAZ
  • MECHANIC
  • 75,992 POSTS
It sounds weird but have you tried bleeding it Hydraulic line is it leaking?
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Monday, February 18th, 2008 AT 11:50 PM
Tiny
TERRISB79
  • MEMBER
  • 2 POSTS
Yes I tried and it won't come out the slave end from what I see, Does the bolt on the slave end, next to the line have to be loose?
Was this
answer
helpful?
Yes
No
Tuesday, February 19th, 2008 AT 2:13 PM
Tiny
RASMATAZ
  • MECHANIC
  • 75,992 POSTS
It should looked like the brake caliper bleeder screw valve-
Was this
answer
helpful?
Yes
No
Tuesday, February 19th, 2008 AT 4:27 PM
Tiny
PLASTICPONY51
  • MEMBER
  • 2 POSTS
Might b the spring that needs to b adjusted behind the clutch pedal ARM.
Was this
answer
helpful?
Yes
No
Wednesday, November 23rd, 2011 AT 5:09 AM

Please login or register to post a reply.

Related Transmission Clutch Master Cylinder Replace/Remove Content

VIEW MORE

Sponsored links