SPONSORED LINKS

Openning the interior of boot door

Tiny
USPAK
  • MEMBER
  • 1998 FORD FESTIVA
I want to install a reversing camera. I need to wire through the boot door interior. Please let me know, how I can open that. Thanks.
Thursday, February 9th, 2012 AT 7:34 AM

5 Replies

Tiny
RIVERMIKERAT
  • MECHANIC
  • 6,110 POSTS
I'm guessing you mean the plastic trim in the boot. These usually are secured to the body of the car with screws. However, I owned a 1998 Escort and the trim in that car was secured to the body with locking friction pins. Pop the center section of the pin out and pull the pin out of the trim.
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Thursday, February 9th, 2012 AT 10:04 AM
Tiny
USPAK
  • MEMBER
  • 8 POSTS
Yes, it is the plastic trim but there are no screws, tags or friction pins that I can see.
Was this
answer
helpful?
Yes
No
Thursday, February 9th, 2012 AT 8:12 PM
Tiny
RIVERMIKERAT
  • MECHANIC
  • 6,110 POSTS
Hmmm. Can you upload a couple of pictures of the trim panels for me to look at?
Was this
answer
helpful?
Yes
No
Thursday, February 9th, 2012 AT 11:59 PM
Tiny
USPAK
  • MEMBER
  • 8 POSTS
Thank you, every one. I opened it. There are pins inside the panel. I just pulled it. To close it, I just need to press the panel on top of them.
Was this
answer
helpful?
Yes
No
Friday, February 10th, 2012 AT 4:59 AM
Tiny
RIVERMIKERAT
  • MECHANIC
  • 6,110 POSTS
Ok. Non-locking friction pins. Happy to have helped. Tell your friends about us.

Closing thread.
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Friday, February 10th, 2012 AT 5:09 AM

Please login or register to post a reply.

Sponsored links